NEWS CENTER
High and low temperature ST300 controller basic operations (Flowchart)
Contact with high temperature chamber a friend, for high and low temperature operation should all be OK, because there will be commissioning engineers on-site installation guide and CD with instructions and teaching, but the chamber on the use of the controller you know how much it? Today, we work together to understand the basic operation ST300 controller:
One, clear function
Due to temperature AND other environmental conditions the impact of, empty scale O'clock Meter might display a nonzero the weight of the readings. To avoid this weight reading on the impact of weighing results, the empty scale must press
2, tare function
Tare function: GW display state, press
Key, the instrument will display weight as tare memory, and displays zero net weight, net weight cursor NET lit simultaneously. Clear tare function: When the scale displays weight, press
Key instrument clears tare, display gross, net cursor NET automatically extinguished, GW cursor GROSS lit simultaneously。
3, preset parameter settings
ST300 preset point output control Selectable four kinds material single-speed or a two kinds material double-speed two kinds modes, the error output selectable preset point tolerances output or zero error output two kinds modes. Soft-switching setting parameters 42, 43 and 44 used to define the preset point output control mode.
Soft switch setting parameter 42: 4 = four kinds of materials Single Speed ??Control Mode
2= Two kinds of material Dual Speed ??Control Mode
Soft switch setting parameter 43: 1 = Error 1 is defined as zero error output a control mode
0 = error of 1 is defined as the preset point tolerance Output 1 Control
Mode
Soft switch setting parameter 44: 1 = Error 2 is defined as zero error output two control modes
0 = Error 2 is defined as the preset tolerance Output 2 Control Mode
Press
key，Instrument into the preset parameter input. In accordance with the soft switch setting parameters 42, 43 and 44 different settings, ST300 total of eight kinds of combinations. Two kinds common settings way are as follows:
Two kinds of material two-speed, error output 1 is defined as the preset tolerance output an error output 2 is defined as the preset tolerance Output 2:
